ckc61125重型数控车床-9游会
model: ckc61125
hits: 106
type: special purpose machine tool
ckc61125 heavy cnc lathe adopts integral floor type bed with guide rail 755mm wide; the large rotation diameter on the bed is 1000 / 1250mm, and the load-bearing capacity of the machine tool can reach 8000kg, which can meet the requirements of users for nc turning of heavy parts. it has good load-bearing and high processing efficiency.
technical parameters:
| 主要技术参数 specifications | 单位 unit | 型号 model |
| ckc/ckd61100 ckc/ckd61125 | ||
| 中心高 center height | mm | 500,625 |
| 床身上大工件回转直径 max swing over bed | mm | 10,001,250 |
| 刀架上大工件回转直径 max swing over carriage | mm | 620,870 |
| 大工件长度 max. part length | 30,005,000 | |
| 大车削长度（床鞍行程）max. turning length(saddle stoke) | mm | 2850, 4850 |
| 床身导轨宽度 bed width | 755 | |
| 主轴孔径 spindle bore diameter | mm | φ130 |
| 主轴孔锥度 spindle bore taller | 公制 metric 140 | |
| 主轴转速级数 number of steps of spindle speed |
ckc 型：21 级（手动变速） ckc: 21 steps (speed manual change) ckd 型：4 档无级调速（变频器变速）、主轴伺服ckd: 4 steps stepless speed regulation(the frequency converter changes speed). spindle servo motor |
|
| 主轴转速范围 range of spindle speed | r/min | 3.15-315 |
| 主电机功率 main motor power | kw | 22 |
| 尾座套筒直径 quill diameter | mm | φ160 |
| 尾座套筒锥度 quill taper | mt6 | |
| 尾座套筒行程 quill travel | mm | 300 |
| x 向行程 x travel | mm | 500, 625 |
| z 向行程 z travel | mm | 28,504,850 |
| 刀杆截面尺寸 size of tool rot | mm×mm | 40×40 |
| 定位精度 positioning accuracy | mm | x：0.03 z：0.05，0.06 |
| 重复定位精度 repeatability | mm | x：0.012 z：0.025 |
| 圆度 roudness | mm | 0.01 |
| 平面度 flatness | mm | 0.03/300（只许凹 only for concave) |
| 表面精糙度 surface roughness | um | ra3.2 |
| 标准配置数控系统 standard cnc system | gsk980tdi / 西门子 siemens 808d |
随机附件（standard accessories）：
φ1000 四爪卡盘及法兰
顶jian、中间套、工具、地脚螺钉、调整垫铁、机床使用说明书。
φ1000 4—jaw chuck and flange,reduction sleeve, foundation bolts, level
blocks,maintenance kit,machine tool manual.
